88 Aspire AX1430 Service Guide
Connecting Case Components
After you have installed the mainboard into a case, you can begin connecting the mainboard components.
Refer to the following:
1. Connect the CPU cooling fan cable to CPU_FAN.
2. Connect the standard power supply connector to ATX_POWER1.
3. Connect the case switches and indicator LEDs to the F_PANEL.
CPU_FAN: CPU Cooling Fan Power Connector
Pin Signal Name Function
1 GND System ground
2 +12V Power +12V
3 Sense Sensor
4 PWM PWM
To Next Page
Loading...
