Acer CP1271 - Color Settings and Calibration; Gamma and Color Temperature; Color Space and Adjustments

English
Color
X
X
Mode - Standard
Warm
Color Temp.
R Gain
G Gain
B Gain
50
50
50
Mode - Standard
General
Color Space
6-axis Saturate
R Bias
G Bias
B Bias
50
50
50
6-axis Hue
Off
Grayscale Mode
Enter
Move
Enter
Move
Audio
OSD
System
Picture
Color
Pertormance
Calibraon
2.2
Gamma
Save Sengs to...
Mode
Audio
OSD
System
Picture
Color
Pertormance
Save Sengs to...
1. Press the MENU key to open the OSD.
2. Toggle the joystick to the up or down to select Color from the OSD.Then toggle to the
right to navigate to the element you wish to adjust and press the joystick to enter it.
3. Toggle to the left or right to adjust the sliding scales.
4. Gamma mode allows you to adjust the luminance tone.The default value is 2.2 (standard
value for Windows).
5. Color temperature: Default is warm. You can choose Cool, Normal, Warm, Bluelight or
User.
6. Modes:To choose scenario mode.
7. sRGB Mode: Default is o󰀨. You can turn sRGB on or o󰀨 to better color match with
peripheral devices, such as printers and digital cameras.
8. Grayscale Mode:To choose Grayscale mode.
9. 6-axis Hue: Adjust the red, green, blue, yellow, magenta and cyan hue.
10. 6-axis Saturate: Adjust the red, green, blue, yellow, magenta and cyan saturation.