Acer ED272 - Adjusting the Color

13
8. Blue Light: filter out blue light by adjusting different Blue Light showing
ratio - 80%, 70%, 60%, 50%
.
9. ACM: Turn ACM on or off. The default is off.
Adjusting the Color
1. Press the
MENU key to open the OSD.
2.
Using the▲/▼ keys, select
Color from the OSD. Then navigate to
the picture element you wish to adjust.
3.
Use the ▲/▼ keys to adjust the sliding scales.
Note: Higher values allow more blue light through. For the best
protection, select a lower value.
4. Gamma mode allows you to adjust the luminance tone. The default value
is 2.2 (standard value for Windows).
5. Color temperature: Default is warm. You can choose Cool, Warm,
Bluelight or User.
6.
7.
6-axis Hue: Adjust the red, green, blue, yellow, magenta and cyan hue.
6-axis Saturate: Adjust the red, green, blue, yellow, magenta and cyan
saturation.