Acer ED272 - Special notes on LCD monitors; Information for your safety and comfort; Safety instructions; Cleaning your monitor

iiiPB
Special notes on LCD monitors
The following are normal with the LCD monitor and do not indicate a problem.
• Duetothenatureofthefluorescentlight,thescreenmayflickerduringinitial
use.T
urn
of
f
thepowerswitchandthenturnitonagaintomakesuretheflicker
disappears.
• Y
ou
mayfindslightlyunevenbrightnessonthescreendependingonthedesktop
patternyouuse.
• TheLCDscreenhas99.99%ormoreef
fective
pixels.Itmayincludeblemishesof
0.01%orlesssuchasamissingpixelorapixellitallthetime.
• DuetothenatureoftheLCDscreen,anafterimageofthepreviousscreenmay
remainafterswitchingtheimage,whenthesameimageisdisplayedforhours.In
thiscase,thescreenisrecoveredslowlybychangingtheimageorturningof
f
the
powerswitchforafewhours.
Information for your safety and
comfort
Safetyinstructions
Read these instructions carefully
. Keep this document for future reference. Follow all
warnings and instructions marked on the product.
Cleaningyourmonitor
Please carefully follow these guidelines when cleaning the monitor:
• Alwaysunplugthemonitorbeforecleaning.
• Useasoftclothtowipethescreenandcabinetfrontandsides.
Connecting/disconnectingthedevice
Observe the following guidelines when connecting and disconnecting power from the
LCD monitor:
• Makesurethemonitorisattachedtoitsbasebeforeconnectingthepowercordto
theACpoweroutlet.
• MakesureboththeLCDmonitorandthecomputerareturnedof
f
before
connectinganycableorunpluggingthepowercord.
• Ifthesystemhasmultiplesourcesofpower
,
disconnectpowerfromthesystemby
unpluggingallpowercordsfromthepowersupplies.