Acer ED322Q

11
Using the OSD Menus
Note: The following content is for general reference only. Actual
product specifications may vary.
Image Adjustment
Phase
5
0 -
50 -
55 -
50 -
1920 1080
H.Position
V.Position
Clock
Purpose:
When the input source is selected VGA, you can adjust the VGA parameters. It is for adjusting VGA H position,
V Position, clock and phase.
Steps:
1.Press Menu key to enter the main menu interface.
2.Press ◄ key to enter the VGA parameter setting interface. (You can select Auto Adjust and press ◄ or ► to
adjust the VGA parameters automatically or adjust it manually)
3.Select H Position and press ◄ or ► to adjust the H Position
4.Select V Position and press ◄ or ► to adjust the V position.
5.Select Clock and press ◄ or ► to adjust the clock.
6.Select Phase and press ◄ or ► to adjust the phase.