27
3D
Note: For supported 3D signal timings, please find the 3D support
document.
It needs correct settings on graphics card 3D application program for correct
3D display.
Note: "3D L/R Invert" and "3D Format" are only available when "3D" is
enabled.
Language
3D
Selects "On" to enable the 3D function supported by DLP 3D
technology.
• On: Select this item while using DLP 3D glasses, quad
buffer (NVIDIA/ATI...) graphics card and HQFS format file
or DVD with corresponding SW player.
• Off: Turns off the 3D mode.
3D Format
If the 3D content is not displayed correctly, you can select a
3D format that suits the 3D content you are viewing and
obtain the best result.
24P 3D Choose 96Hz or 144Hz for 24p 3D.
3D L/R Invert
If you see a discrete or overlapping image while wearing DLP
3D glasses, you may need to execute "Invert" to get best
match of left/right image sequence to get the correct image
(for DLP 3D).
3D Warning
Message
Choose "On" to display the 3D warning message.
Language
Sets a language for the OSD menus. Use to
select your preferred language.
To Next Page
Loading...
