Acer H6805BD - User Manual

Questions and Answers

M
Michelle BellAug 19, 2025
How to fix Acer Projector image too small or too large?
- S
  Stephanie FoxAug 19, 2025
  If your Acer Projector's image is too small or too large, there are a few things you can try. First, adjust the zoom lever located on the top of the projector. If that doesn't work, try moving the projector closer to or further away from the screen. You can also press the "MENU" button on either the control panel or the remote control, then navigate to "IMAGE" > "Aspect Ratio" and experiment with different settings to see if that resolves the issue.
J
john57Aug 21, 2025
How to troubleshoot no image appears onscreen on Acer H6805BD?
- J
  jeremy77Aug 21, 2025
  If your Acer Projector isn't showing any image onscreen, make sure all the cables are correctly connected as described in the "Getting Started" section. Check that none of the connector pins are bent or broken. Also, ensure that the projector is switched on.
D
Diana ConleyAug 23, 2025
Why is the screen of the notebook computer not displaying my presentation on Acer H6805BD Projector?
- K
  Katherine HernandezAug 23, 2025
  If the screen of your notebook computer is not displaying your presentation through the Acer Projector, and you're using a Microsoft® Windows® based notebook, it might be because some notebooks deactivate their own screens when a second display is connected. You should refer to your computer's manual for instructions on how to reactivate it. If you're using an Apple® Mac® OS based notebook, go to System Preferences, open Display, and select Video Mirroring "On."
D
Diane KempAug 26, 2025
How to fix Acer H6805BD image with slanted sides?
- A
  Alexandra ScottAug 26, 2025
  If your Acer Projector image has slanted sides, try these solutions: First, if possible, reposition the projector so it’s centered on the screen and below the screen’s bottom edge. If that doesn’t completely fix it, use the Keystone correction keys on the control panel or remote control until the image appears square.
C
Craig WileyAug 30, 2025
What to do if Acer Projector image is partial, scrolling or incorrectly displayed (For notebooks)?
- C
  Christine JacksonAug 30, 2025
  If your Acer Projector displays a partial, scrolling, or incorrectly displayed image when connected to a notebook, follow these steps: First, adjust your computer's resolution. Then, press the toggle output settings (e.g., [Fn]+[F4] for some Compaq models, [Fn]+[F8] for Dell, etc.). If you have trouble changing resolutions or your monitor freezes, restart all equipment, including the projector.
E
Elizabeth MorrisSep 1, 2025
How to fix reversed image on Acer H6805BD Projector?
- S
  Samantha KelleySep 1, 2025
  If your Acer Projector's image is reversed, go to the OSD, select "INSTALLATION" > "Projection", and adjust the projection direction.
K
kmarshallSep 4, 2025
How to fix out of focus image on Acer H6805BD Projector?
- N
  Natalie MontgomerySep 4, 2025
  If the image from your Acer Projector is out of focus, start by adjusting the focus ring on the projector lens. Also, ensure that the projection screen is within the required distance.
C
Craig HernandezSep 6, 2025
How to fix unstable or flickering image on Acer H6805BD?
- J
  John KnoxSep 6, 2025
  If the image from your Acer Projector is unstable or flickering, try changing the display color setting on your computer.
L
Leah WeaverSep 8, 2025
How to fix Acer H6805BD Projector image with vertical flickering bar?
- S
  smasonSep 8, 2025
  If your Acer Projector's image has a vertical flickering bar, try checking and reconfiguring the display mode of your graphics card to ensure it's compatible with the projector.
J
Jimmy WaltersSep 12, 2025
What to do if Acer H6805BD Projector stops responding to all controls?
- A
  andreablanchardSep 12, 2025
  If your Acer Projector stops responding to all controls, try turning it off, unplugging the power cord, and waiting at least 30 seconds before plugging it back in. Also, make sure the panel key lock function is disabled.