2 Firmware Upgraded Flow
This chapter provides the information regarding relevant eq uipments and upgrading procedure
for firmware upgrade.
Note:
Please check the firmware and composer version before any firmware upgrade procedures.
During firmware download period, please do not shut down PC or projector, this will cause flash
memory’s damage. And need to return the unit to manufacturer for flash memory recovery.
2.1 Check FW version
How to check the firmware version? Please press the button of Power, press “-“ twice, at
last press Menu. You will access the engineering mode and read the firmware version as
below.(This firmware version is just for reference.)
2.2 Setup Tool/Equipment
1. Computer
2. USB Burning Cable (See the picture)
3. Power Cord and AC Adaptor
2.3 Upgrading Procedure
Installing [DLP Composer (TM) Lite]
1. Double-click [DLP Composer Lite v7.1 Setup.exe].
To Next Page
Loading...
