Acer K10 - Hazardous Environments and Hearing Protection

K10
1
1 System Introduction
1.1 Technical Specification
⊙ Display Type
DLP Single Panel Projector
⊙ Panel
Type Y 0.45” DMD
*Model NO.
*Size
0.45 inch (single panels)
*Driver Type
DDP 2230
*Pixels (Resolution)
858 x 600
*Pixel Failure
(follow TI spec.)
As shown below, b ased on “Image Quality
Specification” announced by TI. The attachment is a tentative.
⊙ Projection lens
*Fixed focus
*F/No
*Focal length
*Offset
*MTF
*Lateral color
at all field for any two wavelength
image size
F2 (Design value)
17.67 mm
100%+/-5%
>50% @47lp/mm (typical)
<7 µm
30” @ 1.2 m
*Distortion
TV Distortion < 2.5 %
(Definition and measuring method see Appendix 3)
⊙ Light source
LED module, PT39, Luminus
⊙ Optical system
RTIR System
⊙ Brightness
*Bright mode (Default)
90 lumen (typical) , 80 lumens(min)
⊙ Contrast Ratio(JBMIA)
800:1(typical),600:1 (minimum)
⊙ Optical Compensation
Lens Array
⊙ Light Uniformity(JBMIA)
80%(typical), 75%(minimum)
⊙ Color uniformity(White)
White |dxy|<=0.02
⊙ Throw ratio
1.97(@4:3)
⊙ Focus range
0.6 ~ 2.4 Meter (see Projection Diagram)
⊙ Screen size
15 ~ 60 inches (see Projection Diagram)