Acer K10 - Control Panel Operations; Control Panel Buttons and Indicators

K10
10
3 Machine Disassembly and Replacement
3.1 Tools
Item
Photo
Long Nose Nipper
Nipper
Screw Bit(+):2*5*40
Screw Bit(+):2*4*60
Anti-static wrist strap
Anti-static wrist gloves
3.2 Disassembly Procedure
Warning
 Put on the Static Electricity Ring when starting for repair.
 Repair Environment suggest in Clean-room class 10000. Do not remove Optical
Engine or DMD panel outside the clean room.
 While screwing or un screwing screws, please keep the screwdriver straight.
Keeping screwdriver inclined will damage the screw holes.
 Please turn off the power before replacing any parts.