Acer K10 - Adjusting the Projected Image; Adjusting Image Height

K10
14
10
1. Loosen the screw
J1635-3172-00 to
remove the Photo
Sensor Board.
2. Unplug the three LED
Wires.
11
Loosen screws
J1635-2021-00*4 for
raising the DMD Board
and DMD Heat sink.
12
Loosen the two screws
J1635-2290-00*2 to
remove the Focus-ring.
J1635-3172-00
LED Wires
Long
Short
J1635-2021-00*4
J1635-2290-00*2