6
English
Turning the Projector On/Off
Turning On the Projector
1 Ensure that the AC adapter, power cord and signal cable are securely
connected. The Power LED will flash red.
2 Turn on the lamp by pressing "Power" button on the control panel, and
the Power LED will turn blue.
3 Turn on your source (computer, notebook, video player ,etc.). The
projector will detect your source automatically.
• If the screen displays "Lock" & "Source" icons, it means the projector
locks on this source type and there is no such type of input signal
found.
• If the screen displays "No Signal", please make sure the signal cables
are securely connected.
• If you connect multiple sources at the same time, using the "Source"
button on control panel to switch between inputs.
POWER
1
To Next Page
Loading...
