Acer K10 User Manual

ix
First things first
Usage Notes
Do:
• Turn off the product before cleaning.
• Use a soft cloth moistened with mild detergent to clean the projector
housing.
• Disconnect the power plug from AC outlet if the product is not being used
for a long period of time.
Don't:
• Block the slots and openings on the unit provided for ventilation.
• Use abrasive cleaners, waxes or solvents to clean the unit.
• Use under the following conditions:
• In extremely hot, cold or humid environments.
• In areas susceptible to excessive dust and dirt.
• Near any appliance that generates a strong magnetic field.
• Place in direct sunlight.
Precautions
Follow all warnings, precautions and maintenance as recommended in this
user's guide to maximize the life of your unit.
Warning:
• Do not look into the projector's lens when the lamp is on. The bright light may hurt
your eyes.
• To reduce the risk of fire or electric shock, do not expose this product to rain or
moisture.
• Please do not open or disassemble the product as this may cause electric shock.
• When switching the projector off, please ensure the projector completes its cooling
cycle before disconnecting power.
• Turn on the projector first and then the signal sources.

Acer K10 Specifications

General

Number of colors	16.78 million colors
Vertical scan range	56 - 85 Hz
Horizontal scan range	31 - 69 kHz
Projection technology	DLP
Contrast ratio (typical)	2000:1
Screen size compatibility	0.38 - 1.52 \
Projector native resolution	SVGA (858x600)
Keystone correction, vertical	±40 °
Aspect ratio	4:3, 16:9
Dimensions (WxDxH)	127 x 122 x 48.5 mm
Light source type	LED
Service life of light source	20000 h
Composite video in	1
Noise level	28 dB
Power consumption (standby)	1 W
Power consumption (typical)	55 W
Product type	Standard throw projector

Weight and Dimensions

Weight	550 g