EasyManuals Logo

Acer K10 User Manual

Acer K10
39 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
vi
might cause fire or electric shock. In this case, unplug immediately and
contact your dealer.
Do not keep using this projector if it is broken or you have dropped it. In
this case, contact your dealer for inspection.
Do not face the projector lens to the sun. It can lead to fire.
When switching the projector off, please ensure the projector completes
its cooling cycle before disconnecting power.
Do not touch air outlet grille and bottom plate which becomes hot.
Do not look into the air outlet grille when projector is operating. It may
hurt your eyes.
Do not block the projector lens with any object when the projector is
under operation as this could cause the object to become heated and
deformed or even cause a fire.
Do not attempt to disassemble this projector. There are dangerous high
voltages inside which may hurt you. Refer servicing only to suitable
qualified professional service personnel.
Do not stand the projector on end vertically. It may cause the projector to
fall over, causing injury or damage.
Operating environment for using wireless (optional)
Warning! For safety reasons, turn off all wireless or radio transmitting
devices when using your machine under the following conditions. These
devices may include, but are not limited to: wireless LAN (WLAN), Bluetooth
and/or 3G.
Remember to follow any special regulations in force in any area, and always
switch off your device when its use is prohibited or when it may cause
interference or danger. Use the device only in its normal operating positions.
This device meets RF exposure guidelines when used normally, and it and its
antenna are positioned at least 1.5 centimeters (5/8 inches) away from your
body. It should not contain metal and you should position the device the above-
stated distance from your body.
To successfully transmit data files or messages, this device requires a good
quality connection to the network. In some cases, transmission of data files or
messages may be delayed until such a connection is available.
Ensure that the above separation distance instructions are followed until the
transmission is completed.
Parts of the device are magnetic. Metallic materials may be attracted to the
device, and persons with hearing aids should not hold the device to the ear with
the hearing aid. Do not place credit cards or other magnetic storage media near
the device, because information stored on them may be erased.
Medical devices

Other manuals for Acer K10

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Acer K10 and is the answer not in the manual?

Acer K10 Specifications

General IconGeneral
Number of colors16.78 million colors
Vertical scan range56 - 85 Hz
Horizontal scan range31 - 69 kHz
Projection technologyDLP
Contrast ratio (typical)2000:1
Screen size compatibility0.38 - 1.52 \
Projector native resolutionSVGA (858x600)
Keystone correction, vertical±40 °
Aspect ratio4:3, 16:9
Dimensions (WxDxH)127 x 122 x 48.5 mm
Light source typeLED
Service life of light source20000 h
Composite video in1
Noise level28 dB
Power consumption (standby)1 W
Power consumption (typical)55 W
Product typeStandard throw projector
Weight and Dimensions IconWeight and Dimensions
Weight550 g

Related product manuals