Acer KG272S User Manual

English
Acer LCD Monitor Quick Start Guide (QSG)
Important safety instructions
Please read the following instructions carefully.
1. To clean the LCD monitor screen:
• Turn off the LCD monitor and unplug the power cord.
• Spray a non-solvent cleaning solution onto a rag and clean the screen gently.
2. Do not place the LCD monitor near a window. Exposing the monitor to rain, moisture or sunlight can severely damage
it.
3. Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the display.
4. Do not remove the cover or attempt to service this unit yourself. An authorized technician should perform servicing of
any nature.
5. Store the LCD monitor in a room with a temperature of -20° to 60° C (-4° to140° F). Storing the LCD monitor outside
this range may result in permanent damage.
6. Immediately unplug your monitor and call an authorized technician if any of the following circumstances occur:
• Monitor-to-PC signal cable is frayed or damaged.
• Liquid spills onto the LCD monitor or the monitor is exposed to rain.
• The LCD monitor or case is damaged.
7. Acer monitor is purposed for video and visual display of information obtained from electronic devices:
Attaching the monitor to the base
1. Remove the monitor from the packaging.
2. Attach the footstand to the base. (for selected models).
3. Turn clockwise to lock. Ensure that the base in locked onto the stand. (for selected models)
4. Secure the base to the stand by turning the screw using the intergrated tab or a suitable coin. (for selected models)
Connecting your monitor to a computer
1. Turn off your computer and unplug your computer's power cord.
2. Connect the signal cable to the HDMI (optional) and/or DP(optional)
input socket of the monitor, and the HDMI (optional) and/or
DP(optional) output socket of the graphics card on the computer.
Then tighten the thumbscrews on the signal cable connector.
3. Insert the monitor power cable into the power port at the back of the
monitor.
4. Plug the power cords of your computer and your monitor into a
nearby electrical outlet.
Note: Audio output is only for audio output model. Please check user
manual for more instruction.
AMD FreeSync Premium (HDMI/DP):
It can allow a AMD FreeSync Premium supported graphics source to dynamically adjust display refresh rate based on
typicalcontentframeratesforpowerefcient,virtuallystutterfreeandlow-latencydisplayupdate.
1
2
3
4
5
External controls
1 Power button Turns the monitor on/off.Blue indicates power on. Amber indicates standby/ power
saving mode.
2 Function key
/
a. Press to view Main page. Press again to enter hotkey1 function.
b. When the Function Menu is active, press this key to view the basic
information for your monitor and current input or reset the custom color
settings to the factory defaults.
3 Function key
/
a. Press to view Main page.Press again to enter hotkey2 function.
b. When the Function Menu is active, press this button to select select scenario
mode or game mode .

Acer KG272S Specifications

General

Brand	Acer
Model	KG272S
Category	Monitor
Language	English

Summary

Important Safety Instructions

LCD Screen Cleaning Procedures

Instructions for safely cleaning the LCD monitor screen using a soft rag and non-solvent solution.

General Safety Precautions

Guidelines on monitor placement, handling, servicing, and environmental conditions for safe operation.

Monitor Setup and Connection

Attaching Monitor to Base

Steps for assembling the monitor stand and base, including locking and securing mechanisms.

Connecting Monitor to Computer

Procedure for connecting the signal cable and power cord from the monitor to the computer.

External Controls and Functions

Power Button Indicator

Description of the power button's LED indicator for power on and standby/power saving modes.

Function Key Navigation

Details on using function keys to access menus, hotkeys, settings, and navigate options.

Regulatory Compliance and Safety Notices

FCC and ICES Compliance

Information regarding compliance with FCC Part 15 and Canadian ICES standards for digital devices.

CE Declaration and EMC Regulations

Details of CE compliance with EMC, Low Voltage, and ecodesign directives, and requirements for shielded cables.

Peripheral Device and Operation Cautions

Guidelines for connecting peripherals, cautions on modifications, and safe operating conditions.

EU Waste Disposal Guidelines

Instructions for proper disposal of electronic waste in the EU and general environmental considerations.

Product Specifications

LCD Panel Characteristics

Details on LCD panel type, size, pixel pitch, brightness, contrast, viewable angle, and response time.

Display Performance Metrics

Specifications for display colors, dot clock, maximum resolution, and refresh rates.

Power and Connectivity

Information on power consumption modes, input connectors, video signals, and audio output.

Physical and Environmental Data

Dimensions, weight, operating temperature, humidity, and storage conditions.

External Controls and Functions List

Overview of adjustable settings and functions accessible via external controls, including modes and adjustments.