33
English
English
Important: If you have an NVIDIA graphics card and the NVIDIA 3D
Vision drivers installed, you may need to disable the Stereoscopic
feature to use the DLP 3D technology.
Using the stereoscopic player
You need to have a stereoscopic player in order to view 3D content. The
instructions below explain how to view 3D content using the stereoscopic player
that is available at www.3dtv.at. Other players may have different procedures.
1 Open the stereoscopic player and set the viewing method by going to View >
Viewing Method > Software pageflipping.
2 Open the 3D content in the player.
Note: You need to view content at fullscreen resolution in order to get
the 3D effects.
Downloaded From projector-manual.com Acer Manuals
To Next Page
Loading...
