Why does my Acer Projector lamp burn out or make a popping sound?
When the lamp reaches the end of its useful life, it will burn out and may make a loud popping sound. If this happens, the Acer Projector will not turn on until the lamp module has been replaced.
How to fix vertical flickering bar on Acer P1500 image?
Use the "Frequency" setting to make an adjustment. Also, check and reconfigure the display mode of your graphics card to make it compatible with the projector.
Guidelines for safe operation, disconnection, and accessibility.
Overview of the projector's key features and technologies.
Visual identification of projector parts and rear panel connections.
Diagram and list of connections for VGA, component video, and composite signals.
Steps to power on the projector and connect sources.
How to use the projector's elevator feet to adjust image height and angle.
How to access and use the OSD installation menu for setup.
Overview of unique Acer functions accessed via the Empowering Key.
Utilizing eView for display mode selection and optimization.
Solutions for common image display issues like no image, scrolling, or incorrect display.
Notices regarding FCC rules, interference, peripheral devices, cautions, and operation.
To Next Page
General
