Acer P243W

Use a Phillips-head screwdriver unscrew 4 screws
to release the stand base.
(No1~4 Screw Size=M4x10;
Torque=13 KGFxCM).±1
Disassemble the stand cover.
P
ut returned unit on a protective cushion,then
remove LDPE+EPE bag.
Tear off tapes to remove the screen protector
card then turn over the LCD monitor (screen
faced down),
Take off two cushion foams
Take out all accessories including D-SUB cable
power cable, DVI cables, user’s manual, and
packing material from the carton.
(Note: It depends on whether users returning
the accessories.)
Open the carton with a proper tool.
Turn over the LCD monitor (screen faced up).
S6
S5
S4
S3
S2
S1
S7
4.2 Disassembly procedures
PUT CABLE IN THIS POSITION
PUT USER’S
MANUAL IN THIS
POSITION
1
2
3
4
FEATURE LABEL
VISTA LABEL
16
Go to cover page
4. Assembly and Disassembly Procedures (continued)
ACER P243W