Acer P7505 - Page 55

45
English
3 Use the appropriate number of screws for the projector size to attach the
projector to the ceiling mount bracket.
Note: It is recommended that you keep a reasonable space
between the bracket and the projector to allow for proper heat
distribution. Use two washers for extra support, if deemed
necessary.
4 Attach the ceiling bracket to the ceiling rod.
-
Smaller Washer
Projector Bracket
Large Washer
Supports projector and allows
for adjustments
Screw Type B
Spacer
- For heat dissipation
-
Screw Type A
50 mm length/
8 mm diameter
Large cylinder cap
Allen Key
- For tightening/loosening
Tightening Screw
Downloaded From projector-manual.com Acer Manuals