17
-----------------------------------------------------------------------------------------------------------
Note:
sRGB: For better color matching representation with the peripheral devices, such
as printers, digital cameras, etc.
Rec. 709: For better color matching representation with Standard Rec.709.
HDR: For better color matching representation with the high dynamic lighting
rendering (HDR) , support Local diming effect.
User: Applies a combination of picture settings dened by users.
Standard: For basic PC application (Default Setting).
ECO: For saving electricity with low power consumption by providing minimum
brightness for all running programs.
Graphics: For better color matching representation with the graphics.
Movie: For better color matching representation with the movie.
Modes default parameter:
sRGB Rec.709 HDR User Standard ECO Graphics Movie
ACM Off Off Off N/A Off Off Off Off
Gamma 2.2 2.4 2.2 N/A 2.2 2.2 2.2 2.2
Contrast 50 50 50 N/A 50 50 60 56
Blue Light Off Off Off N/A Off Off Off Off
Color Temp Warm Warm Warm N/A Warm Warm Warm Warm
Black Boost 5 5 5 N/A 5 5 5 5
Brightness 30 60 100 N/A 80 44 97 77
Over Drive Normal Normal Normal N/A Normal Normal Normal Normal
Refresh Rate
Num
Off Off Off N/A Off Off Off Off
Super
Sharpness
On On On N/A Off Off Off Off
Note:
Function item is gray out and parameters are xed not open to modify.
sRGB/Rec.709/HDR:
1. Users can adjustment (Brightness, Over Drive, Refresh Rate Numand Super
Sharpness).
2. If parameter to modify and been saved the Modes will not jump to User
mode.
3. 6-axis (Hue and Saturate) are gray out and can't adjustment.
4. Grayscale mode is gray out and can't adjustment.
To Next Page
Loading...
