Acer PE270K - Page 28

PE270K User Guide English
18
7. Color Space: You can choose sRGB, HDR, EBU, DCI and SMPTE-C.
-----------------------------------------------------------------------------------------------------------
Note: There are three modes to correspond to the color space.
Modes = sRGB(sRGB), Modes=Rec.709(Rec.709), Modes=HDR(HDR)
Color Space details:
sRGB Rec.709 HDR EBU DCI SMPTE-C Standard
ACM Off Off Off Off Off Off N/A
Gamma
2.2 2.4 2.2 2.4 2.6 2.2 N/A
Contrast 50 50 50 50 50 50 N/A
Blue Light Off Off Off Off Off Off N/A
Color Temp
Warm Warm Warm Warm Warm Warm N//A
Black Boost 5 5 5 5 5 5 N/A
Brightness 30 60 100 80 80 80 N/A
Over Drive Normal Normal Normal Normal Normal Normal N/A
Refresh Rate Num Off Off Off Off Off Off N/A
Super Sharpness On On On Off Off Off N/A
Note:
Function item is gray out and parameters are xed not open to modify.
(EBU / DCI / SMPT-C) and modes = "standard" are shared parameter values, that
can be adjusted and saved.
1. CIE 1931 positive and negative error of 0.03, ("HDR" according to current
Panel to ne-tune).
2 N/A means to follow the current parameter value (Ex. Blue Light parameter
value).
3 Whenselect color space (sRGB, Rec.709, HDR), the mode (sRGB, Rec.709,
HDR) effect isturned on at the same time.