Acer PT167Q - The Function Page - OSD and System Settings; OSD menu settings

English
OSD
Mode - Standard
120
English
OSD Timeout
Picture
Color
Language
Gaming
OSD
System
Informaon
Enter
Move
Off
Transparency
1. Press the MENU key to open the OSD.
2. Toggle the joystick to the up or down to select OSD from the OSD.Then toggle to the
right to navigate to the element you wish to adjust and press the joystick to enter it.
3. Toggle to the left or right to select settings.
4. Language: Set the OSD menu language.
5. OSD timeout: Adjust the delay before turning off the OSD menu.
6. Transparency: Select the transparency when using gaming mode. The transparency
can be 0% (OFF), 20%, 40%, 60%, or 80%.
System
Mode - Standard
Picture
Color
DDC/CI On
Quick Start Mode
Off
Gaming
OSD
System
Informaon
Enter
Move
Hot Key Assignment
Full
Wide Mode
1. Press the MENU key to open the OSD.
2. Toggle the joystick to the up or down to select System from the OSD.Then toggle to the
right to navigate to the element you wish to adjust and press the joystick to enter it.
3. Toggle to the left or right to select settings.
4. Wide mode: You can select which screen aspect you are using. The options are Full
and Aspect.
5. key 1(Modes, Gamma, Contrast, Blue Light) and shortcut key 2(Modes, Gamma,
Contrast, Blue Light).
6. DDC/CI: Allows the monitor settings to be set through the software on the PC.