Acer PT167Q - The Function Page - Information and Saving Settings

English
-----------------------------------------------------------------------------------------------------------
Note: DDC/CI, short for Display Data Channel/Command Interface, which allows
monitor controls to be sent via software.
7. Quick start mode: Select Off or On. Turn on to speed up boot speed.
Information
Mode - Standard
Picture
Color
Main Source
VGA
Reset All Sengs
H/V Frequency
H:56 KHz V:60 Hz
Serial Number
MN53035032682016TPV888
Resoluon
1366x768
Gaming
OSD
System
Informaon
Enter
Move
Exit
Save Setting to…(User mode only)
Mode - Reading
Picture
Mode - sRGB
Mode - Darkroom
Save Seng to...
Mode - User
Color
Gaming
OSD
System
Informaon
Enter
Move
Exit
1. Press the MENU key to open the OSD.
2. Toggle the joystick to the up or down to select "Save Setting to..." from the OSD.Then
toggle to the right to navigate to the element you wish to adjust and press the joystick
to enter it.
3. Save Setting to some mode: There are three user-dened proles available. When you
have decided what settings suit you, save them and system will be able to recall the
settings in the future when you turn on these mode.