Why does my Acer Projector have no image?
If no image appears on your Acer Projector, ensure it's connected as described in the "Getting Started" section, and that none of the connector pins are bent or broken. Check if the projector lamp has been securely installed. Also, make sure you've removed the lens cap and that the projector is switched on.
What to do if the image is too small or too large on Acer S1383WHne Projector?
To fix an image that is too small or too large on your Acer Projector: Adjust the zoom lever on the top of the projector. You can also move the projector closer to or further from the screen. Alternatively, press "MENU" on the remote control, go to "Image - -> Aspect Ratio" and try different settings, or press "RATIO" on the remote control to adjust directly.
What to do if Acer S1383WHne stops responding to controls?
If your Acer Projector stops responding to all controls, turn off the projector, then unplug the power cord and wait at least 30 seconds before reconnecting power.
Why is the screen of the notebook computer not displaying my presentation on Acer S1383WHne Projector?
If the screen of your notebook computer is not displaying your presentation on the Acer Projector: * If you are using a Microsoft® Windows® based notebook: Some notebook PCs may deactivate their own screens when a second display device is in use. Each has a different way to be reactivated. * If you are using an Apple® Mac® OS based notebook: In System Preferences, open Display and select Video Mirroring "On".
How to fix slanted sides on Acer S1383WHne Projector image?
To correct slanted sides on your Acer Projector image: If possible, reposition the projector so that it is centered on the screen. You can also press the "Keystone / " button on the remote control until the sides are vertical. Alternatively, press "MENU" on the remote control to open the OSD menu and go to "Image"->"Keystone" to make adjustments.
How to fix out of focus image on Acer Projector?
If the image on your Acer Projector is out of focus: First, make sure the lens cap is removed. Then, adjust the focus ring on the projector lens. Ensure the projection screen is within the required distance of 3.3 to 12.5 feet (1.0 to 3.8 meters) for XGA series or 3.3 to 11.0 feet (1.0 to 3.4 meters) for WXGA series from the projector.
How to fix image is stretched when displaying a widescreen DVD title on Acer S1383WHne?
When playing a DVD encoded in anamorphic or 16:9 aspect ratio on your Acer Projector, you may need to adjust the following settings: * If you play a 4:3 format DVD title, please change the format to 4:3 in the projector OSD. * If the image is still stretched, you will also need to adjust the aspect ratio. Set up the display format to 16:9 (wide) aspect ratio on your DVD player.
How to fix unstable or flickering image on Acer S1383WHne?
To correct an unstable or flickering image on your Acer Projector: Adjust the "Tracking". Also, change the display color depth settings on your computer.
Why is the Acer S1383WHne Projector image reversed?
If the image on your Acer Projector is reversed, select "Image --> Projection" on the OSD and adjust the projection direction.
How to fix vertical flickering bar on Acer S1383WHne image?
To address a vertical flickering bar on your Acer Projector image: Use "Frequency" to make an adjustment. Also, check and reconfigure the display mode of your graphics card to make it compatible with the projector.
To Next Page
General
