Why does my Acer Projector have no image?
If your Acer Projector displays no image, verify that the signal cable and source are working correctly. If multiple sources are connected, use the 'Source' button on the control panel to switch between them. Also, make sure all connectors are securely connected and not broken. If the issue persists, check the Main Board, DMD Board, Colour Wheel, DMD Chip, and Engine Module.
What to do if Acer Projector remote control or control panel failed?
If the remote control or control panel on your Acer Projector fails: * For the remote control: * Check the battery. * Check the remote controller. * Check the IR receiver. * Check the Main Board. * For the control panel: * Check the FPC. * Check the keypad. * Check the Main Board.
How to troubleshoot no power on Acer S1200?
If your Acer Projector has no power, ensure the power cord and AC power outlet are securely connected. Check the Lamp Cover and Interrupt Switch. Make sure all connectors are securely connected and not broken. Also, inspect the Lamp Driver, LVPS, and Main Board.
What to do if my Acer S1200 shuts down automatically?
If your Acer Projector shuts down automatically, check the LED status: 1. If the Power LED is (B)lue or (R)ed, Lamp LED is (R)ed, and Temp is off, check the Lamp, Lamp Driver, and Main Board. 2. If Power is (R)ed or (B)lue, Lamp is off, and Temp is (R)ed or Blinking (R)ed, check the Thermal Switch and Fan. 3. If Power is (R)ed or (B)lue, Lamp is Blinking (R)ed, and Temp is off, check the Color Wheel and Photo Sensor.
How to fix image flicker on Acer S1200 Projector?
To resolve image flicker on your Acer Projector: * Perform a 'Reset (All data)' in the OSD Menu. * Ensure the signal cables and source are working correctly. * Check the Lamp Module, Colour Wheel, DMD Board, and Main Board.
How to resolve colour abnormality on Acer Projector?
To resolve colour abnormalities on your Acer Projector: * Perform a 'Reset (All data)' in the OSD Menu. * Adjust the Colour Wheel Index. * Check the Main Board, DMD Board, and Colour Wheel.
Why is there no light on my Acer S1200?
If there is no light on your Acer Projector, ensure all connectors are securely connected and not broken. Check the Lamp Module, Lamp Driver, LVPS, and Main Board.
How to fix garbage image on Acer S1200?
To fix a garbage image on your Acer Projector, ensure that the signal cables and source are working correctly. Check the Main Board and DMD Board.
What causes mechanical noise in Acer Projector?
Mechanical noise in your Acer Projector can be caused by the Colour Wheel or the Fan Module. Check these components to identify the source of the noise.
How to resolve poor uniformity or shadow on Acer Projector?
To resolve poor uniformity or shadows on your Acer Projector: * Ensure the projection screen is clean and free of dirt. * Ensure the projection lens is clean. * Ensure the Brightness is within specification. * Check the rod alignment and Engine Module.
To Next Page
General
