To Next PageTo Next Page
Need help?Do you have a question about the Acer SVGA Series and is the answer not in the manual?
General| Native Resolution | 800 x 600 |
|---|---|
| Projection Technology | DLP |
| Projection Distance | 1.1 - 11.8 m |
| Input Ports | VGA |
| Projection Size | 30 - 300 inches |
| Resolution | SVGA (800 x 600) |
Instructions for safely powering down the projector for maintenance.
Guidelines for safe connection and disconnection of the power supply unit.
Advice on power outlet accessibility for safe disconnection.
Important warnings regarding water, placement, ventilation, and object insertion.
Guidelines for safe operation using the correct power source and avoiding overloads.
Instructions on when to seek professional servicing for the projector.
Advice on avoiding looking into the lens and precautions for operating environments.
Recommendations for safe listening volumes to protect hearing.
Guidance on proper recycling, disposal, and mercury content.
Basic do's and don'ts for projector operation and maintenance.
Key safety precautions to maximize projector lifespan and safe use.
Safety warnings and best practices for cleaning the projector lens.
Detailed list of key technologies and capabilities of the Acer projector.
List of items included with the projector package.
Identification of external components on the front and upper side of the projector.
Detailed list and location of input/output ports on the rear of the projector.
Detailed list and location of input/output ports on the rear of the projector.
Explanation of buttons and indicators on the projector's control panel.
Identification of buttons on the projector remote control.
How to navigate and operate the projector using MHL control modes.
Diagrams showing how to connect various devices to the projector.
Steps to power on the projector and select input sources.
Procedures for safely shutting down the projector, including cool-down.
Instructions on using projector feet and tilt wheels for image height adjustment.
Table and diagram for adjusting distance and zoom for desired image sizes.
Options for projection direction, mode, and location.
Selecting the correct aspect ratio for different content types.
Correcting image distortion caused by projector tilt.
Customizing startup screen and managing input sources.
Managing captioning and DC output settings.
Configuring standby VGA output and HDMI CEC function.
Enabling projector security and password protection.
Managing user and administrator passwords for projector access.
Configuring network identification and addresses like IP, WiFi, MAC.
Enabling remote power-on and automatic IP configuration.
Resetting network parameters to factory defaults.
Optimizing power and performance for different conditions.
Configuring projector shutdown behavior and automatic power-off.
Managing panel lock and viewing lamp operating time.
Technologies for optimizing visual comfort and image quality.
Selecting factory-optimized image presets for various scenarios.
Adjusting color based on display mode and wall background color.
Fine-tuning image parameters for optimal visual output.
Customizing color balance and dark scene representation.
Fine-tuning individual color components and saturation.
Enhancing color saturation and white detail for vivid images.
Optimizing settings for film viewing and image clarity.
Professional calibration options and minimizing display lag.
Customizing names for user-defined display modes.
Options for projection direction, mode, and location.
Selecting the correct aspect ratio for different content types.
Correcting image distortion caused by projector tilt.
Fine-tuning keystone and adjusting image shape for uneven surfaces.
Adjusting image size and position without moving the projector.
Adjusting image clarity, position, refresh rate, and signal timing.
Adjusting color range for HDMI input to correct display errors.
Configuring overscan settings for HDMI signals.
Customizing startup screen and managing input sources.
Managing captioning and DC output settings.
Configuring standby VGA output and HDMI CEC function.
Enabling projector security and password protection.
Managing user and administrator passwords for projector access.
Configuring network identification and addresses like IP, WiFi, MAC.
Enabling remote power-on and automatic IP configuration.
Resetting network parameters to factory defaults.
Optimizing power and performance for different conditions.
Configuring projector shutdown behavior and automatic power-off.
Managing panel lock and viewing lamp operating time.
Accessing model name, serial number, and software version.
Adjusting audio levels and notification volumes.
Activating DLP 3D function and selecting compatible formats.
Adjusting 3D format and image sequence for optimal display.
Option to display warnings when 3D mode is active.
Choosing the preferred menu language for the projector's OSD.
Solutions for no image, partial, or incorrectly displayed images.
Fixing flickering, focus, and image stretching problems.
Correcting reversed images and slanted sides.
Understanding messages for fan failure and overheating.
Solutions for unresponsive controls and lamp burn-out.
Understanding the meaning of different LED status indicators.
Instructions and safety warnings for service personnel replacing the lamp.
Steps for securely attaching the mount base to the ceiling.
Instructions for attaching the projector to different bracket types.
Final adjustments for projector angle, positioning, and screw specifications.
Key technical details like projection system, compatibility, and colors.
List of items included in the projector package.
FCC rules and guidelines for device operation and interference.
Requirements for connecting peripherals and using shielded cables.
Compliance information for Canadian users regarding digital apparatus.
Declaration of conformity with EU directives and applied harmonized standards.
Supported resolutions and frequencies for VGA analog input.
Supported resolutions and frequencies for HDMI PC input.
Supported video formats and resolutions for HDMI input.
