How to fix no image on Acer S1370WHn?
If no image appears on your Acer Projector screen, ensure that all connections are correctly set up as described in the "Getting Started" section. Verify that none of the connector pins are bent or broken. Check that the projector lamp is securely installed. Also, ensure you have removed the lens cap and the projector is switched on.
How to adjust image size on Acer Projector?
If your Acer Projector displays an image that is too small or too large, adjust the zoom lever on the top of the projector. Alternatively, move the projector closer to or further from the screen. You can also press "MENU" on the remote control, navigate to "Image - -> Aspect Ratio," and try different settings, or press "Aspect Ratio" on the remote to adjust directly.
How to fix out of focus image on Acer Projector?
If your Acer Projector image is out of focus, first ensure that the lens cap is removed. Then, adjust the focus ring on the projector lens. Also, make sure the projection screen is within the required distance of 3.3 to 11.0 feet (1.0 to 3.4 meters) from the projector.
What to do if notebook screen isn't displaying presentation on Acer Projector?
If the screen of your notebook computer is not displaying your presentation through the Acer Projector, and you are using a Microsoft® Windows® based notebook, note that some notebooks may deactivate their own screens when a second display device is in use. Refer to your computer's manual for reactivation instructions. If you're using an Apple® Mac® OS based notebook, open Display in System Preferences and select Video Mirroring "On".
What to do if Acer Projector stops responding?
If your Acer Projector stops responding to all controls, turn off the projector, unplug the power cord, and wait at least 30 seconds before reconnecting the power.
How to correct slanted sides image on Acer Projector?
If your Acer Projector displays an image with slanted sides, try repositioning the projector so that it is centered on the screen. You can also press the "Keystone / " button on the remote control until the sides are vertical. If the "Keystone" button is unavailable, press "MENU" on the remote control, go to "Image - -> Auto Keystone" and choose "Off" on the OSD.
How to fix stretched widescreen DVD image on Acer Projector?
If your Acer Projector displays a stretched image when playing a widescreen DVD, you may need to adjust settings. If playing a 4:3 format DVD, change the format to 4:3 in the projector OSD. If the image remains stretched, adjust the aspect ratio on your DVD player to 16:9 (wide). For Letterbox (LBX) format DVDs, change the format to Letterbox (LBX) in the projector OSD.
How to stabilize flickering image on Acer S1370WHn Projector?
If the image displayed by your Acer Projector is unstable or flickering, adjust the "Tracking" setting. You may also need to change the display color depth settings on your computer.
How to resolve vertical flickering bar on Acer Projector image?
If your Acer Projector has an image with a vertical flickering bar, use the "Frequency" setting to make an adjustment. Also, check and reconfigure the display mode of your graphics card to ensure it is compatible with the projector.
How to correct reversed image on Acer Projector?
If your Acer Projector image is reversed, select "Image --> Projection" on the OSD and adjust the projection direction.
General| Resolution | 1280 x 800 (WXGA) |
|---|---|
| Weight | 2.5 kg |
| Display Technology | DLP |
| Zoom Ratio | 1.1x |
| Lamp Life | 5000 hours (Standard), 6000 hours (Eco) |
| Connectivity | HDMI, VGA, USB |
| Keystone Correction | ±40° Vertical |
| Projection Distance | 1.0 - 10.0 m |
| Screen Size | 30 - 300 inches |
| Brightness | 3700 ANSI Lumens (Standard), 2960 ANSI Lumens (ECO) |
| Speakers | 2W x 1 |
To Next Page
