This document is a user guide for an Acer LCD Monitor, providing comprehensive instructions and information for its setup, operation, and maintenance.
Function Description
The Acer LCD Monitor is designed for video and visual display of information obtained from electronic devices. It functions as a primary output device for computers, allowing users to view graphical interfaces, documents, multimedia content, and more. The monitor supports various display modes and resolutions, ensuring compatibility with a wide range of systems. It incorporates a Display Data Channel (DDC) protocol, enabling plug-and-play functionality by automatically communicating its capabilities to the host system, including supported resolutions and timing. The monitor also features power management capabilities, automatically entering a "power saving" mode during user inactivity to conserve energy.
Usage Features
The monitor offers a variety of usage features to enhance user experience and comfort:
- Screen Position Adjustment: Users can adjust the monitor's tilt to optimize their viewing position. The monitor can be tilted 15 degrees up or 5 degrees down by holding its edges.
- Connectivity: The monitor provides multiple input options, including VGA and HDMI (optional, for HDMI-input models), allowing connection to various computers and devices. It also supports an optional audio cable for audio input.
- External Controls: The monitor is equipped with external controls for easy access to its functions. These include a power button/indicator, OSD (On-Screen Display) function button, input selection button, volume adjustment button, brightness adjustment button, and a mode selection button.
- Shortcut Menu: A shortcut menu provides quick access to commonly used settings such as Modes, Brightness, Volume, Input, and the main OSD menu.
- Input Source Selection: Users can manually select the input source (VGA or HDMI) or enable "Auto Source" for automatic detection of available signal sources.
- Volume Adjustment: The monitor allows for precise adjustment of the audio volume through the OSD.
- Brightness Adjustment: Users can adjust the display brightness from 0 to 100 to suit their preferences and ambient lighting conditions.
- Modes Selection: The monitor offers various display modes, including Action, Racing, Sports, User, Standard, ECO, Graphics, and Movie, each optimized for different content types.
- Picture Adjustment: Within the OSD, users can fine-tune picture settings such as Brightness, Contrast, Black Boost, Blue Light filter, ACM (Adaptive Contrast Management), Super Sharpness, Auto Config (for VGA port only), H. Position, V. Position, Focus, and Clock. The Blue Light filter helps protect eyes by reducing blue light emission, with adjustable levels (80%, 70%, 60%, or 50%). Super Sharpness technology enhances image clarity by boosting pixel density.
- Color Adjustment: Color settings can be adjusted, including Gamma (luminance tone), Color Temperature (Cool, Normal, Warm, Bluelight, or User), 6-axis Saturate (red, green, blue, yellow, magenta, cyan saturation), and 6-axis Hue (red, green, blue, yellow, magenta, cyan hue).
- Audio Adjustment: Users can adjust the audio volume and configure "Over Drive" settings (Off, Normal, or Extreme) for enhanced audio performance.
- Gaming Features: The monitor includes gaming-specific features such as FreeSync support (default on), which dynamically adjusts the display refresh rate for smoother, stutter-free gameplay. When FreeSync is "ON," the Over Drive setting is automatically set to "Normal." If FreeSync is "OFF," users can manually set Over Drive to Extreme, Normal, or Off. An "Aim Point" feature can display a crosshair on the screen for shooting games.
- OSD Adjustment: The OSD menu itself can be customized. Users can select the OSD language, adjust the OSD Timeout (delay before turning off the OSD menu), and set the Transparency (0%, 20%, 40%, 60%, or 80%) when using gaming mode. The "Refresh Rate Num" option displays the panel's current refresh rate.
- System Settings: System-level adjustments include selecting the input source, enabling/disabling "Auto Source," choosing "Wide Mode" (Full, Aspect, or 1:1), assigning functions to "Hot Keys" (Key1 & Key2), enabling/disabling DDC/CI (Display Data Channel/Command Interface) for software-based monitor control, adjusting "HDMI Black Level Setting" (Normal or Low), and enabling/disabling "Quick Start Mode" for faster boot speed.
- Product Information: The monitor provides access to basic product information, including the main source, resolution, H/V frequency, mode, and serial number.
- Save Settings: Users can save their customized settings into three user-defined profiles, which can be recalled when turning on gaming mode.
Maintenance Features
The user guide emphasizes several maintenance aspects to ensure the longevity and proper functioning of the monitor:
- Cleaning: The monitor should always be unplugged before cleaning. A soft cloth should be used to wipe the screen and the cabinet's front and sides.
- Electrical Safety: Users are instructed to ensure the power outlet is easily accessible and close to the equipment. The power cord should be unplugged from the electrical outlet to disconnect power. It's crucial not to overload power outlets or power strips and to use the product only with the supplied power supply cord set, ensuring it meets specified requirements if replaced. The product's three-wire grounded plug requires a properly grounded power outlet for safety.
- Environmental Protection: Acer is committed to environmental protection and encourages recycling of used equipment. Disposal instructions advise against throwing the electronic device into regular trash and direct users to recycle it according to Waste from Electrical and Electronics Equipment (WEEE) regulations.
- Handling Precautions: Users are warned not to use the product near water, on unstable surfaces, or in vibrating environments. Slots and openings for ventilation must not be blocked or covered to prevent overheating. Objects should never be pushed into cabinet slots, and liquids should not be spilled onto or into the product. When installing, care should be taken to avoid injury. The monitor should not be lifted by its base to prevent damage.
- Troubleshooting: The manual includes a troubleshooting section for both VGA and HDMI modes, providing common problems, LED status indicators, and suggested remedies to help users self-diagnose and resolve issues before seeking professional servicing. This includes advice on adjusting brightness, contrast, checking cable connections, and verifying computer system status.
- Professional Servicing: Users are advised not to attempt servicing the product themselves, as it may expose them to dangerous voltage. All servicing should be referred to qualified service personnel, especially if the power cord is damaged, liquid has been spilled, the product has been exposed to rain, dropped, or exhibits a distinct change in performance.
Need help?
General
Weight and Dimensions
To Next Page
