4 Chapter 1
• Should support 1.44MB/3 mode 3.5” Devices
Extension slot
• 1 * PCIE x16 (PCIE V2.0)
• 2 * PCIE x1 (PCIE V2.0)
Buzzer
• 1 on board buzzer
Rear I/O connectors
• 1 D-Sub port
• 1 DVI-D port
• 1 Display port
• 6 USB 2.0 ports
• 1 RJ45 LAN port
• 3 mini audio jacks
• At least five HD audio in/output
• 2 PS2 keyboard/mouse connector
• 1 serial port
On-board connectors
• 1 LGA 1155 CPU socket
• 4 DDR3 DIMM memory sockets
• 1 PCI Express x16 slot
• 2 PCI Express x 1 slot
• 1 PCI slot
• 1 FDD header
• 5 SATA connectors( (6Gb/s*1 for Q65. must use different color to define, others should be SATAII. )
• Four 2*5 pin Intel FPIO specification USB pin connectors (follow Intel FPIO standard Specification)
• One 2*5 pin Intel FPIO spec. Microphone In/ Headphone Out pin connectors
• One 4 pin CPU Fan connector
• One 3 pin(co-lay 4pin) System Fan connector with linear circuit
• One 4 pin SPDIF header closed to PCIEx16 slot
• One 24 pin ATX interface PS3/PS2 SPS connector.
• One 2*7 pin front panel IO header
• One Jumper for clear CMOS
• One on board buzzer
• One 2pin OBR header
• Two reserved 2pin GPIO connector
• One Serial port header (COM2) (near rear IO is preferable)
• One 2pin Intrusion Alarm connector
• One LPT 2*13pin header (near rear IO is preferable)
• One 2*4 pin internal speaker header
• One 3pin ME enable/disable connector (with 1 jumper)
• 1 a debug port XDP Connector(BOM option)
To Next Page
Loading...
