Chapter 1 5
• Color management for on board connecter
• Header Naming should follow MB Header Naming
System BIOS
• Kernel: AMI Aptio Kernel with Acer skin/copyright.
• Type:
• Use SPI Flash
• Size: 64M
Power supply
• 300W/ 500W in stable mode (Acer/GTW Assign System Power Unit).
• Design for Intel Piketon chipset compatible system.
• Voltage design should be covered +5V, +3.3V, +12V, +5VSB, -12V (attention to 12V output capability).
• Demand for both PFC/Non-PFC solutions (two different quotations are needed).
• Minimum 4 Serial ATA power connector solution should be included (by default).
• Minimum 1 big 4-pin power connector included.
• Minimum 1 small 4-pin power connector included.
• PFC version will not provide switch selector for 115/230V AC input but it should be universal for Europe
and China.
• Non-PFC version should provide switch selector for 115/230V AC input and universal for worldwide.
• PS2 style.
• Compliant with EnergyStar 5.0.
• EuP lot6 requirements.
To Next Page
Loading...
