2 Chapter 1
• 1 GB to 16GB Max memory support(using 4Gb tech).
• DDR3 1.5V 1333/1600.
• Design Criteria:
• Should meet Intel Ivy Bridge/ Sandy Bridge Family design guide.
• Support 1.5V DIMM.
• Dual channel should be enabled always when plug-in 2 same memory size DDRIII memory
module.
Hard disk drive
• Support SATA interface.
• 3.5”, 25.4mm, 80/160/320/500/640/1TB/2TB G or higher capacity.
• 5400/7200 rpm or higher".
• Capacity and models are listed on AVL.
Optical disk drive
• Support SATA 5.25” standard ODD.
• Support DVD-ROM, DVD-SuperMulti (Label Flash), BD-DVD, BD-Combo. BD-RW.
• Capacity and model is listed on AVL.
Graphics
• Intel® HD Graphics Support
• Dual independent display.
• Digital display (HDMI/DVI/DP/eDP) and VGA.
• DVMT 5.0 technology support.
• Enhanced 3D and Clear Video technology support.
• 1 DVI-I port at rear side.
• 2 DP port on rear.
• 3 Independent Digit Display support.
• Need to measure VGA follow Acer VGA SOP.
• Monitor compatible is requested to the monitor AVL and DQM recommended list.
Graphics card support
• Support Normal length graphics cards in the single PCIe X16 slot.
Serial ATA controller
• Connector Type: SATAII connector and SATAIII connector.
• Connector Quantity: 4(6Gb/s*2 ports, must use different color to define, other are 3Gb/s).
• Storage Type support:
• 3.5” SATAII/SATAIII HDD.
• Combo/ DVD supermulti/Blue-ray DVD ODD.
• RAID/AHCI/IDE mode option.
• Default RAID mode.
To Next Page
Loading...
