47 Chapter 3
Removing the Memory Modules
IMPORTANT:Before removing any DIMM from the memory board, make sure to create a backup file of all
important data.
1. Press to open the holding clips (1) securing the memory module.
2. Gently pull the memory module upward (2) to remove it from the DIMM1 slot.
Note:Circuit boards >10 cm² has been highlighted with the yellow rectangle as above image shows. Please
detach the Circuit boards and follow local regulations for disposal.
3. Repeat steps 1 and 2 to remove the second memory module from the DIMM2 slot.
To Next Page
Loading...
