Acer Veriton X4620G - Jumper Configuration

Chapter 5 106
Jumper Setting
The section explains how to set jumper for correct configuration of the mainboard.
Checking Jumper Settings
The following illustration shows the location of the motherboard jumpers. Pin 1 is labeled.
Jumper Settings
Jumper
Type Description
Setting (default)
CLR_CMOS
3-pin Clear CMOS
1-2: NORMAL
2-3: CLEAR
Before clearing the CMOS, make
sure to turn the system off.
CLR_CMOS
ME_DISABLE 3-pin Disable ME
1-2: NORMAL
2-3: ME disable
BIOS_WP 3-pin BIOS Flash
protect
1-2: BIOS_WP
2-3: NORMAL