Chapter 2 23
Power
Parameter Description Option
ACPI Aware OS Enables or disables the Advanced Configuration and Power
Management (ACPI) function.
Yes
No
ACPI Suspend Mode Select an ACPI state. S3 (STR)
S1 (POS)
Deep Power Off Mode Select the Deep power off Mode Enabled
Disabled
Power On by RTC Alarm Enables or Disables to wake up the system by RTC Alarm Function Enabled
Disabled
Power On by PCIE Devices This system can be turned off with a software commend. If you enable
this item, the system can automatically resume if there is an incoming
call on the PCIE LAN card.You must use an ATX power supply in order
to use this feature.Use this item to dowake-up action if inserting the
PCIE card.
Enabled
Disabled
Power on by Modem Ring This system can be turned off with a software commend. If you enable
this item, the system can automatically resume if there is an incoming
call on the Modem. You must use an ATX power supply in order to use
this feature.
Enabled
Disabled
Power On by Onboard LAN Enables or disables an onboard LAN controller to generate a wake
event.
Enabled
Disabled
Wake Up by PS/2 KB/
Mouse
Enables or disables to wake up the system from a power saving mode
using a PS2 keyboard or mouse.
S1&S3
Disabled
Wake Up by USB KB/
Mouse
If enabled, press any key or click the mouse will wake system from S1/
S3 state.
S1&S3
Disabled
Restore On AC Power Loss Enables or disables the system to reboot after a power failure or
interrupt occurs.
Off
On
Last State
To Next Page
Loading...
