Acer VG240YU User Manual

Troubleshooting
Before sending your LCD monitor for servicing, please check the troubleshooting list below
to see if you can self-diagnose the problem.
HDMI2.0/DP Mode (Optional)
Problem LED status Remedy
No picture visible Blue Using the OSD menu, adjust brightness and
contrast to maximum or reset to their default
setting.
Off Check the power switch.
Check if the AC power cord is properly
connected to the monitor.
Amber Check if the video signal cable is properly
connected at the back of monitor.
Check if the computer system is switched on
and in power saving/standby mode.
If OSD Lock is On, the LED status set Amber.
Note: Acer monitor is purposed for video and visual display of information obtained from
electronic devices.

Acer VG240YU Specifications

General

Screen Size	23.8 inches
Resolution	2560 x 1440 (QHD)
Panel Type	IPS
Refresh Rate	75 Hz
Contrast Ratio	1000:1
Aspect Ratio	16:9
Adaptive Sync	AMD FreeSync
Viewing Angle	178° horizontal, 178° vertical
Response Time	1ms (VRB)
Ports	1 x DisplayPort, 1 x HDMI
VESA Mount Compatible	Yes (100 x 100mm)
Connectivity	HDMI, DisplayPort