What to do if Acer Projector stops responding to controls?
If your Acer Projector stops responding to all controls, turn off the projector, then unplug the power cord and wait at least 30 seconds before reconnecting power.
What happens if the Acer X1111 lamp burns out?
When the lamp reaches the end of its useful life, it will burn out and may make a loud popping sound. If this happens, the projector will not turn on until the lamp module has been replaced.
General| Display Technology | DLP |
|---|---|
| Lamp Life | 5000 Hours (Standard), 6000 Hours (ECO) |
| Throw Ratio | 2.15 |
| Projection Size | 30" to 300" |
| Input Connectors | Composite Video |
Guidelines for operating the projector using electrical power safely.
Procedures and warnings related to servicing the projector.
Lists the outstanding features of the DLP projector.
Illustrates how to connect various devices to the projector.
Step-by-step instructions for powering the projector on and off.
Table guiding optimal image size based on projector distance.
Onscreen display for projector installation and maintenance.
How to navigate and use the projector's OSD menus for adjustments.
Adjustments for display mode, wall color, brightness, contrast, and color balance.
Settings for projection mode, aspect ratio, keystone, sharpness, and 3D.
Options for menu location, color range, security, and reset functions.
Guide to resolving image and projector issues, including OSD messages.
Step-by-step guide for replacing the projector lamp.
Details projector system, resolution, computer/video compatibility, aspect ratio, colors.
Information on the projection lens and supported screen sizes.
To Next Page
