Acer X1161 - Page 71

X1161/X1261 Condential
5-7
9. Click "Reset Bus" to erase the ash
memory.
10. If the FW is ready, click "Start Download"
to execute the rmware upgrade.
- Click "Yes".
11. It takes about several minutes, the
rmware upgrade process is nished,
"Download completed" will appear on the
screen.
- Unplug RS232 cable and power cord.
(for X1261)
Note: Please unplug USB cable and power
cord. (for X1161)
12. Check FW version.
- Re-plug in power cable, then restart the
unit and get into the Service Mode to
check the rmware version.
(To get into Service Mode, please press
"Power", "Left", "Left" and "Menu" buttons
sequentially on remote controller.)