6
Remote Control Layout
# Function Description
1 POWER Refer to the "Turning the Projector On/Off" section.
2 MEDIA SETUP (No function)
3 ZOOM Zooms the projector display in or out.
4 MODE Chooses a display mode.
5
Keystone
Adjusts image distortion caused by tilting projection
(±40 degrees).
Four
directional
selection
keys
Selects items or makes adjustments to your selection.
6 Keypad 0~9 Press "0~9" to input a password in the "Setting" >
"Security" OSD.
7 VGA To change source to VGA. This connection supports
analog RGB, YPbPr (480p/576p/720p/1080i/1080p), and
YCbCr (480i/576i).
8 COMPONENT To change source to Component video. This connector
supports YPbPr/YCbCr.
9 S-VIDEO To change source to S-Video.
10 HDMI™/DVI To change source to HDMI™ (or DVI). (for the model
with HDMI™ or DVI connector)
11 Infrared
transmitter
Sends signals to the projector.
12 FREEZE To pause the screen image.
X1185/X1185N/X1285/X1285N/S1285/
S1285N/P1185/X1385WH/H5381BD/
H5383BD/H6518BD/H6502BD
P1285/P1385W/P1525/
H6525BD/P1623
To Next Page
Loading...
Need help?
General
