26
Note: Functions vary depending on model definition.
Information
Note: Functions vary depending on model definition.
Network Settings LAN IP / Mask
Identify IP and Mask address.
WiFi IP/Mask
Identify IP and Mask address.
MAC Address
Identify MAC address.
Wake on LAN (Standby)
Set to "On" to enable wake-on-LAN function to power on
projector via LAN under standby status. It is required to download
WOL(wake-on-LAN; WOL) tool or app for PC/Mobile by users for
this function.
DHCP
• On: Projector will obtain an IP address automatically from
your network.
<Note> Grey out when LAN isn't plugged in and LAN IP X.X.X.X
show 0.0.0.0
LAN Reset
Reset LAN function.
Reset Press the "ENTER" button and choose "Yes" to return the
parameters on all menus to the factory default settings.
Information Display the projector information for Model Name, Input Source,
Signal Type, Display Mode, Serial No. and Software Version
screen.
To Next Page
Loading...
