2.0 Product Disassembly Process
2.1 List the basic steps that should typically be followed to remove components and materials requiring
selective treatment:
2.2 OPTIONAL: Depending upon the complexity of the disassembly process, a graphic depicting the
locations of items contained within the product which require selective treatment (with descriptions
and arrows identifying locations) can be inserted below:
6. Assembly and Disassembly Procedures
Disassembly Procedur
Step. 1 Pull the Vesa-Cover out by screwdriver
Step.2 Unscrew four screws then pull out the stand
To Next Page
Loading...
