Acer XF272 User Manual (English)

To Next Page

English

Acer LCD Monitor Quick Start Guide (QSG)

Important safety instructions

Please read the following instructions carefully.

1. To clean the LCD monitor screen:

• Turn off the LCD monitor and unplug the power cord.

• Spray a non-solvent cleaning solution onto a rag and clean the screen gently.

2. Do not place the LCD monitor near a window. Exposing the monitor to rain, moisture or sunlight can severely damage

it.

3. Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the display.

4. Do not remove the cover or attempt to service this unit yourself. An authorized technician should perform servicing of

any nature.

5. Store the LCD monitor in a room with a temperature of -20° to 60° C (-4° to140° F). Storing the LCD monitor outside

this range may result in permanent damage.

6. Immediately unplug your monitor and call an authorized technician if any of the following circumstances occur:

• Monitor-to-PC signal cable is frayed or damaged.

• Liquid spills onto the LCD monitor or the monitor is exposed to rain.

• The LCD monitor or case is damaged.

7. Acer monitor is purposed for video and visual display of information obtained from electronic devices:

Attaching the monitor to the base

1. Remove the monitor from the packaging.

2. Attach the footstand to the base. (for selected models).

3. Turn clockwise to lock. Ensure that the base in locked onto the stand. (for selected models)

4. Secure the base to the stand by turning the screw using the intergrated tab or a suitable coin. (for selected models)

Connecting your monitor to a computer

1. Turn off your computer and unplug your computer's power cord.

2. Connect the signal cable to the HDMI (optional) and/or DP(optional)

input socket of the monitor, and the HDMI (optional) and/or

DP(optional) output socket of the graphics card on the computer.

3. Connect the USB Cable(Optional)

Connect the USB 3.0 cable to port for fast charge.

Connect the USB 3.0 cable to port.

4. Insert the monitor power cable into the power port at the back of the

monitor.

5. Plug the power cords of your computer and your monitor into a

nearby electrical outlet.

Note: Audio output is only for audio output model. Please check user

manual for more instruction.

USB

HDMI 1(2.0) HDMI 2(2.0)

FreeSync (HDMI/DP):

It can allow a FreeSync supported graphics source to dynamically adjust display refresh rate based on typical content

frameratesforpowerefcient,virtuallystutterfreeandlow-latencydisplayupdate.

External controls

1 Power button Turns the monitor on/off.Blue indicates power on. Amber indicates standby/ power

saving mode.

Need help?

Do you have a question about the Acer XF272 and is the answer not in the manual?

Acer XF272 Specifications

General

Screen Size	27 inches
Resolution	1920 x 1080 (Full HD)
Refresh Rate	240 Hz
Response Time	1 ms
Panel Type	TN
Brightness	400 cd/m²
Contrast Ratio	1000:1
Adaptive Sync	AMD FreeSync
Color Gamut	99% sRGB
VESA Mount	100 x 100 mm
Ports	1 x DisplayPort 1.2, 1 x HDMI 2.0
Viewing Angle	170° horizontal, 160° vertical