If your Acer Monitor displays no picture, here are some things to check:
* If the LED is on, use the OSD to adjust the brightness and contrast to the maximum or reset them to their default settings.
* If the LED is off, check the power switch.
* Ensure the AC power cord is properly connected to the monitor.
* If the LED displays an amber color, check if the video signal cable is properly connected at the back of the monitor.
* Verify that the computer system is powered on.
K
karen08Aug 8, 2025
How to fix abnormal sound on my Acer Monitor?
K
Kimberly JohnsonAug 8, 2025
If you're experiencing abnormal sound on your Acer Monitor (audio-input model only), ensure the audio cable is connected to the host PC. Also, check if the volume setup on the host PC is at the minimum; if so, raise the volume level.
L
Leslie RamirezAug 18, 2025
Why is my Acer XF251Q Monitor displaying an unstable picture?
K
Kathryn RodriguezAug 18, 2025
An unstable picture on your Acer Monitor may be due to a mismatch between the graphics adapter and monitor specifications, causing an input signal frequency mismatch. Also, if the display is missing, center-shifted, or the display size is too small or too large, use the OSD to adjust RESOLUTION, CLOCK, CLOCK-PHASE, H-POSITION, and V-POSITION with non-standard signals. In case of a missing full-screen image, use the OSD to select another resolution or vertical refresh timing. After adjusting the image size, wait a few seconds before changing or disconnecting the signal cable or powering off the monitor.