B. How to Exit Burn In Mode
Step 1. When the monitor is under burn-in mode, press the power key first
If DC off successfully, press the power key once again to DC on the monitor. The burn-in
mode has been turn off already.
If DC off failed, please go to step 2.
Step 2. If power key is unusable, send a HDMI signal to the monitor to make sure it can show
what you have sent. Then press the power key to DC off and DC on the monitor. The burn-in
mode has been turn off already .
Remark 1 :
VGA signal : with VGA port model
HDMI signal : without VGA port model
To Next Page
Loading...
