Acer XFA243Y - CONNECTING THE POWER CORD

5
CONNECTING THE POWER CORD
• Check first to make sure that the power cord you use is the correct type
required for your area.
• This monitor has a universal power supply that allows operation in
either 100/120V AC or 220/240 V AC voltage area. No user-adjustment
is required.
• Plug one end of the AC power cord to an AC inlet, and plug the other
end into an AC outlet.
• For unit using at 120 V AC:
Use a UL Listed Cord Set, Type SVT wire and plug rated 10 A/125 V.
• For unit using at 220/240 V AC (outside of U.S.):
Use a Cord Set consisting of H05VV-F cord and plug rated 10 A, 250 V.
The cord set should have the appropriate safety approvals for the
country in which the equipment will be installed.
• Swivel
With the built-in pedestal, you can swivel the monitor for the most
comfortable viewing angle.
o
-360
360
• Monitor Pivot
Before rotating the display, lift it to the top position and then push it back to
the utmost degree. Rotate until the monitor stops at 90°.
o
o
o