S3
Disassemble SPK and
Lamp wire
Tear off tapes of the SPK wire, extract the SPK wire from the IF BD and disassemble
the SPK from the MF as picture 1.
Extract the LED wire from the IF BD and tear off the wire from the SHD as picture 1 in
green frame.
Tear off the black tape of the lamp wire, tear off black mylar on SHD and extract the
lamp wire from the P/BD as picture 2
Unlock 2 TRIM screws and disassemble the ASSY TRIM from the MF as picture 1.
Disassemble the LED BD from the Trim and extract the LED wire from the LED BD as
picture 2.
S5
Disassemble SHD and
MF.
Tear off tapes and extract 2 FFC wires from the panel as picture 1.
Unlock 9 screws from the MF and disassemble the MF from the Pane as picture 2.
Extract the lamp wire from the panel as picture 2.
PICTURE 1 PICTURE 2 PICTURE 3
To Next Page
Loading...
