Acom PC-100 - Operation; Setting Waiting Time; General Weighing Procedure

Operation
1. Setting a waiting time(optional)
• Press “*” key with empty platter(zero status)
timE
• Press “*” key again, number displayed means
30
waiting time in second
• Waiting time changes by pressing “TARE” key 15
45
seconds interval up to 3 minutes, choose a time
*Set time “0”for a continues operations
• Press”*”key to programming and exit to normal
0
mode
0
•Remove commodity
•Remove tare and press “TARE” key, designator
0
“NET” it turned off
2. General weighing
Always confirm “ZERO” mark before weighing and read weight after
“STABLE” marked on
324
•Put commodity on the platter
•Read weight after stable marked on
324
•Remove commodity
0
7