Acorn MASTER-TROL User Manual

STATION
ENABLE
STATION
DISABLE
How to enable a valve using STATION ENABLE:
1. From the “PRESS YOUR DESIRED
FUNCTION KEY” screen, press the
“STATION ENABLE” button.
How to disable a valve using STATION DISABLE:
2. If you are connected to multiple controllers,
enter the controller address with the valve
you want to program and press “ENTER”.
If not, proceed to step #3.
3. Enter the station number of the valve you
want to program and press “ENTER”.
4. After confirmation, the Handheld
Programmer will return to the controller/
station screen. You can either disable a
new valve, or press the “ESCAPE” button
to change a different feature.
1. From the “PRESS YOUR DESIRED
FUNCTION KEY” screen, press the
“STATION DISABLE” button.
2. If you are connected to multiple controllers,
enter the controller address with the valve
you want to program and press “ENTER”.
If not, proceed to step #3.
3. Enter the station number of the valve you
want to program and press “ENTER”.
4. After confirmation, the Handheld
Programmer will return to the controller/
station screen. You can either enable a
new valve, or press the “ESCAPE” button
to change a different feature.
Technical Support: (800) 743-8259
www.acorneng.com
10

Acorn MASTER-TROL Specifications

General

Brand	Acorn
Model	MASTER-TROL
Category	Motherboard
Language	English