INTRODUCTION
Master-Trol Handheld Programmer (CPT) can be used to program a single
Master-Trol Controller, or all controllers connected to a Versa-Link. The Handheld
Programmer is portable which allows you to connect to any controller directly. It is small and
light weight but capable of programming a majority of the system’s features.
FEATURES
Overall Dimensions: 6.75” x 4.75” x 1.5” (172mm x 121mm x 38mm)
Weight: 14.4oz (408g)
20 Character x 2 line LCD display
Auto Shutoff feature will automatically power down the programmer if it remains idle
for 5 minutes to conserve battery life.
Included with Handheld Programmer: 9V Battery, Versa-Link Interface Cable, and User
Manual.
Technical Support: (800) 743-8259
www.acorneng.com
1
To Next Page
Loading...