STATUS
Controller
Address
Station
Number
Enabled/
Disabled
Status
Actuator
Mode
Programmed
“ON TIME”
Programmed
“LOCKOUT TIME”
How to view valve Status:
2. If you are connected to multiple controllers,
enter the controller address with the valve
you want to view and press “ENTER”. If
not, proceed to step #3.
3. Enter the station number of the valve you
want to view and press “ENTER”.
1. From the “PRESS YOUR DESIRED
FUNCTION KEY” screen, press the
“STATUS” button.
4. The following screen will display multiple parameters for the chosen valve.
5. Press the “ENTER” button to cycle to the
next valve, or press the “ESCAPE” button
to change a different feature.
Technical Support: (800) 743-8259
www.acorneng.com
14
To Previous Page
Loading...
Need help?
General