Playing audio using Bluetooth
You
can
use
many
Bluetooth devices
to
play
audio
through
the
Q M 20 system. Firstly you
will have
to
pair
your
Bluetooth
device
with
the speaker using the following instructions.
1. Press
and
hold
the
Bluetooth
input
button
on
the
remote control until
the
blue LED
flashes
on
the
speaker. Alternatively, press
the
Bluetooth
button
on
the
back
of
the
amplified speaker, the LED will flash blue.
2. Select the Bluetooth settings
on
your
device, and
look
for
Q M
20
HD in devices.
3. Select
the
Q M 20
HD
device in
the
new
Bluetooth device list.
Once connected, the LED will stop flashing
and
remain on blue.
4. You can
now
play
audio
from
your
device.
Once
you
have paired a device,
you
can
simply
connect
to
the
Q M 20 next
time
which
will
turn
on
and
select the Bluetooth input.
When playing audio,
you
can use
the
device,
the
remote control
or
the buttons
on
the
amplified speaker
to
alter
the
volume. You
can
also use
the
remote control
to
play,
pause
and
skip
tracks.
Clearing
the
Bluetooth pairing list
You can
clear
all the devices
from
the
Bluetooth pairing list
memory
if
required
by
using
the
following
steps:
1. Put the speakers into Bluetooth pairing
mode
with a long press
of
the BLU
source
button
on
the
remote control,
the
LED will
be
flashing Blue.
2. Press
and
hold
the
BLU
source
button
on
the
remote control again, until the LED
goes
out
and
then
flashes three times.
The
8/uetooth pairing list is
now
cleared from
the memory
and
devices must pair again in
order to connect.
8
Playing audio using optical digital
Use a standard TOSLINK optical
cable
to
connect
your
digital
audio
source
to
the
amplified Q M
20
speaker.
• Press the OPT button
on
the
remote
control
or
press
the
C
button
on
the
speaker until
the
LED is
on
white.
You can use
the
remote control
or
the buttons
on the amplified
speaker
to
alter
the
volume.
Playing audio using analogue
• Use the phono sockets or the 3.5mm stereo
jack socket
to
connect your analogue audio
source. Press the ANA button on the remote
control or press the C button on the speaker
until the
LED
is on green.
You can use
the
remote control
or
the
buttons
on
the amplified
speaker
to
alter
the
volume.
Playing audio using USB
Connect
a USB A-B
type
cable
from
your
computer
device
to
the
Q M
20
amplified
speaker.
• Press
the
USB
button
on
the remote
control
or
press
the
C button
on
the
speaker until the LED is
on
yellow.
You will then need
to
download
the
correct
USB driver
from
the
Q Acoustics website
here:
https://desk.zoho.com/portal/
armourhomeelectronics/en/kb/qacoustics
Save
the
file
on
your
computer, then follow
these instructions
for
Windows
1 O
1.
Open
'Device manager'
2. Select 'USB2.0 High-Speed True HD
Audio'
in
'Sound,
video and
game
controllers'
3. Select 'Driver'
and
then
'Update Driver'
4. Select 'Browse my computer for drivers, then
browse
to
the downloaded folder and select
5.
Windows
will then
update
the
driver
6.
Once
finished,
you
can
select 'SPDIF
(USB2.0 High-Speed True HD Audio)' from
the
speaker
selection.
7.
Open
your
music
playing
application and
enjoy.
You can use the remote control
or
the
buttons
on
the
amplified
speaker
to
alter
the
volume.
To Next Page